Plena End of Line Pilot Tone Detection Board Six Pack
PLN-1EOL
- Plena end-of-line boards monitor the presence of a pilot tone on a loudspeaker line.
- The board connects at the end of a loudspeaker line and detects the 20 kHz pilot tone signal. This signal is always present on the line: when back ground music (BGM) is playing, when a call is in progress, and when no signal is present.
- The 20 kHz tone is inaudible and at a very low level (-20dB). When the pilot tone signal is present, an LED lights up, and a contact on the board is closed.
- When the pilot tone fails, the contact opens, and the LED goes off.
- If mounted at the end of the loudspeaker line, this applies to the integrity of the whole line.
- Presence of the pilot tone signal does not depend on the number of loudspeakers on the line, the load on the line, or the line capacitance.
- The contact can be connected to a PA system, such as the Bosch Voice
Alarm System, to detect and report faults on a loudspeaker line.
Tham khảo chi tiết tài liệu kỹ thuật thiết bị tại đây.
tư vấn về Sản phẩm & Dịch vụ
Thông tin liên hệ
Công ty Cổ phần Thương mại AIC
14 Trần Bình Trọng, Hoàn Kiếm, Hà Nội.
Email: info@aictrading.vn – Điện thoại: (024)39.422.321/22
Website: aictrading.vn – Facebook: facebook.com/aictrading



